compression ring

During compression, clapper will slowly move up, away from the seat.

在压缩时, 阀瓣将慢慢上移, 离开阀座.

According to the Boyles'Low, lung volumes expand during rapid decompression.

依据波义耳定律, 快速的减压上升,可造成肺臓体积的膨胀.

While it works effectively in data compression, it brings the compression artifacts.

该方法能有效降低数据量, 但同时也带来了压缩损伤.

During rapid decompression, the consequences of pulmonary overinflation can cause alveolar rupture arterial embolism.

当快速减压时, 肺臓会发生过度膨胀的现象,终至肺泡破裂,使得气泡进入血液内,造成空气栓塞症的发生.

Analysis of bearing ability heavy Load cold die against compression load

重负荷冷作模具的承压能力分析

The member bearing compression in the truss could be regard as a battened column with the single axis of symmetry.

这种角钢桁架中的受压件在结构上是一个单轴对称缀板柱。

CAUTION: The check valve disc and spring assembly are in compression.

警告: 止回阀阀瓣和弹簧总成是压缩在一起的.

During rapid decompression, the consequences of pulmonary overinflation can cause alveolar rupture leading arterial gas embolism.

当快速减压时,肺?会发生过度膨胀的现象, 终至肺泡破裂,使得气泡进入血液内,造成空气栓塞症的发生.

Special replacement rings will control compression and oil in cylinders with some taper and out-of-round wear.

在这种情况下,特别精选的油环有助于控制气缸的压力和油耗.

The effects of friction on metallic rheology and mechanical parameters during plane strain compression were studied.

研究了平面应变压缩过程中摩擦对金属流变规律以及力能参数的影响.

The theoretical study indicates, the stiffness and ring crush compression resistance of the original materials, structure and structure parameter are the main factors that influence the compression strength.

理论研究表明，原材料的挺度、环压强度以及盒型结构和结构参数是影响纸盒抗压强度的主要因素。

Analyze and compute the theory of motorcycle engine valve phase and compression ratio measuring system . 3.

对气门相位、压缩比测量的理论分析和方法计算.

Compression of springs must not exceed manufacturers recommendation for speed and long life.

弹簧的压缩比不允许超过制造商推荐的高速及长寿时的压缩比.

Conclusion The anatomical basis of the compression of the dorsal branch of the ulnar nerve is repetitive traction to this nerve during wrist movement, and the compression of the transverse branch is the main cause of ulnar wrist pain.

结论腕关节反复屈伸时尺神经手背支尤其是横支被牵拉和压迫是造成尺神经手背支卡压的解剖学基础。

The compression strength and osmotic coefficient of the permeable bricks were antinomies relation, which were affected by shaping pressure sintering temperature aggregate size.

粉煤灰透水砖的抗压强度和透水系数是一对矛盾关系，主要受成型压力、烧成制度、骨料粒径等因素影响。

Connecting rod is mainly bearing alternate loads such as compression, stretch, bending and otherwise.

连杆主要受压缩 、 拉伸和弯曲等交变负荷.

This form of gasket has good performance of temperature, low leakage rate, high compression spring rate.

该形式的垫片具有耐温性能好 、 泄漏率低压缩回弹率高的特点.

Calculation of eccentric compression member with ring section in non-uniform reinforcement

环形截面偏压构件非均匀配筋承载力计算

Spring Processing: Compression springs, disc springs, toys spring, shaped spring, conical springs.

弹簧加工: 压缩弹簧 、 碟形弹簧 、 玩具弹簧 、 异型弹簧 、 锥形弹簧.

The reactor with the compression-type structure is mainly composed by the base, the reaction cell plate, slide, rubber ring and screwing cap.

该反应器采用压装式结构，主要由基座、反应池板、玻片、橡胶圈和旋盖组成。

For horizontal loading, all specimens'capacity bearing loading varied as axial compression applied to them changed.

对于恒定轴压比下水平加载, 试件承受水平荷载能力随轴压比的改变而有所变化.

Moreover, the invariants of the stress deviator were employed to analyze the metal deformation process of ring compression and hydro-bulging toroidal shell by numerical simulation, and also the simulated and experimented results have a good agreement.

并且通过数值模拟的方法，采用偏应力张量不变量对圆环压缩和环壳液压胀形过程中金属的变形进行了分析，模拟结果和实验现象一致。

Valve should be tighten with O ring rubber with max . 25 % compression.

阀门的密封需通过“O”型密封圈实现,密封圈最大压缩量不允许超过25%.

Pulse compression of two cell stimulated Brillouin scattering ( SBS ) system high beam quality was experimentally investigated.

实验研究了双池受激布里渊散射系统中的脉冲压缩.